PVC edge tape extruder machine
The PVC edge strip extruder is one of the key components in the plastic material production and processing industry. The edges of furniture are commonly accessorized with PVC edging tape, which this machine is builtin to produce. Likewise, this machine is used in the confectioning of polymer products
These edging strips or veneers, intended for various edges of artifacts and structure used in diverse fields, are produced by this machinery. Usually, the main component of these strips is PVC (Polyvinyl Chloride) along with some other polymer additives
Contact number for consultation and order: 09336367315
Specification table
The final products of the PVC edge tape extruder machine
The production line process of the PVC edge tape extruder machine
Taking into account primary resources as raw materials, their production process in the extruder comprises of pre mixing and preparing raw materials, extruder melting forming and cutting to length cooling. The peculiar mechanical, optical and durability characteristics of these PVC edges have enabled further options in furniture, construction as well as packaging industries.
Features of the PVC edge strip extruder machine
Stable and reliable performance
عملکرد قابل اعتماد
Precise adjustment and control
قابلیت تنظیم و کنترل دقیق
High productivity
بهرهوری بالا
Variety of products
تنوع محصولات
Components of the PVC edge strip extruder machine
- Feed hopper: Granules and PVC powder raw materials are loaded into the machine via the feed hopper. Usually, the hopper is fitted with a flow control mechanism that ensures uniform flow of the materials into the subsequent section.
- 2. Screw and cylinder: A screw is a spiral piece that guides the materials forward and compresses and mixes them at the same time, a cylindrical cylinder in which the screw rotates and heats the materials in contact with the wall.
- 3. Heating system: including heating elements that regulate the temperature of the cylinder, this system carefully controls the temperature so that the PVC material reaches a paste state. It usually has different heating zones to optimize the melting process.
- 4. Cooling system: After the material is removed from the mold, the produced strips must be cooled to stabilize their shape, usually cooling water or air system is used to reduce the temperature, this system helps to prevent warping or deformation of the strip.
- 5. Pulling unit: It pulls the output strips from the mold slowly and at a constant speed, this unit controls the pressure to prevent damage to the strips.
- 6. Cutting unit: Cuts the production strips to specific lengths or prepares them for collection.
- 7. Collection and rolling system: The tapes are packed in rolls after production, this system can prepare the rolls based on desired sizes.
- 8. Control system: including the control panel or intelligent systems for adjusting and monitoring the process, it provides the possibility of controlling temperature, speed, pressure, and other key parameters.
- 9. Dryer of raw materials: to remove the moisture of materials before entering the machine
- 10. Printing and laminating part: to add designs with special colors on the strips